1. The equipment consists of a 4-station planetary brush disc grinding head combination structure, and the 4 groups of grinding heads are arranged in two straight lines. Between the two units, the front and back of the workpiece are continuously polished by the magnetic turning mechanism; The single brush disk rotates at high speed, the whole brush disk combination rotates quickly, the front and back brush disk groups run in positive and negative directions, and the workpiece face edge holes and grooves are uniformly grinding without dead corners in all directions, removing the processing residue burrs and obtuse polishing.
2. The abrasive material of each unit is different, and the workpiece is processed differently. The first group of grinding head, Dupont abrasive wire brush disc, the number of mesh is large, the main grinding to remove the workpiece end blade and hole valve core sharp Angle fast burr and fillet; The second group of grinding head, DuPont abrasive wire brush disc, mesh number is relatively small, grinding principle is the same as the first group, grinding and polishing workpiece end face and R Angle texture is more diluted and delicate.
3. Each group of grinding head is equipped with an independent electronic control system, which can be run separately or combined according to demand; Servo motor control automatic lifting, precise positioning of workpiece thickness, automatic compensation of consumables loss; According to the different process requirements of the workpiece deburring, replace the dupont wire or abrasive cloth brush tray with different mesh numbers to achieve different process effects.
4. The outlet of the equipment is equipped with stainless steel fully enclosed waterproof demagnetization device, which is integrated and installed in the lower part of the conveyor belt, and does not occupy space; Oil-cooled structure, micro-electronic demagnetization, adjustable power, demagnetization standard < 5gs; The workpiece after processing is barrier-free and demagnetized without stopping through the demagnetization area.
5. Straight-line processing, belt conveying, conveying speed 0-6 meters per minute variable frequency adjustable. The conveyor bed is configured with permanent magnetic (6000GS or more) adsorption conveyor bed can adsorb at least 5 square cm sheet workpiece without fixture; Aluminum alloy profile bars are installed on both sides of the conveyor bed to prevent the workpiece from sliding out of the conveyor bed under heavy pressure caused by human error.
6. The conveying bed is durable, NC precision machining, and the strong disk is the precision grinding plane of the overall casting process, ensuring that the long-term overload is not deformed, and the polishing and deburring effect of the grinding workpiece is uniform.
7. A set of water drain is installed at the back end of the demagnetization device at the outlet of the conveyor bed to wash the surface stains of the workpiece. Waste water back to the paper belt filter after recycling, energy saving and environmental protection; A set of air knife is installed at the end of the water discharge to blow away the water stain on the surface of the workpiece, so that there is no water drop when the workpiece is discharged. The exterior of the water exhaust and air knife is equipped with a protective cover to prevent the splash of sewage.
8. The grinding chamber is a completely closed structure, with waterproof and explosion-proof lighting installed inside and transparent acrylic plate observation window to visualize the processing process; The top of the cavity is installed with a water mist purifier to absorb the water vapor in the cavity and reduce the water vapor concentration.
| Disk rotation: 2400r |
Planetary revolution: 120r |
Transmission speed: 0-6/min (variable frequency) |
| Processing thickness: 0.5-50mm |
Minimum processing: 10*20mm (sheet) |
Worktable height: 800mm±50mm |
| Maximum processing width: ≤300mm |
Fixed thickness mode: automatic lifting compensation |
Grinding method: wet grinding |
| Positioning method: strong magnetic adsorption |
Control system: PLC programming, man-machine interface |
|
Q:How to remove product burrs?
A:The equipment consists of two groups of planetary brush disk combined structure; A single brush disc high-speed autobiography, the whole combination of rapid rotation, the front and back two groups of brush disc combination running in the opposite direction, through sweeping, grinding, filing and other actions, all-round no dead Angle to the workpiece edge, holes, grooves burrs
Q:What is the price of the equipment?
A:According to customer product process needs, machine configuration depends,High equipment configuration, preferential prices, much cheaper than Europe and the United States
Q:What are the features of the equipment?
A:The company independent research and development manufacturing, with complete independent intellectual property rights; The equipment is convenient to operate, simple to maintain, energy saving and environmental protection, stable and durable, and the processing product efficiency is high and the quality is good, and the equipment is upgraded for the metal parts polishing industry.
Q:What are the features of the equipment?
A:The company independent research and development manufacturing, with complete independent intellectual property rights; The equipment is convenient to operate, simple to maintain, energy saving and environmental protection, stable and durable, and the processing product efficiency is high and the quality is good, and the equipment is upgraded for the metal parts polishing industry.
Q:What is the delivery date of the goods?
A:The delivery time of our products in the peak season is 60 days, and the delivery time of our products in the off-season is about 30 to 45 days.
Q:What packing are the goods to be sent abroad?
A:The delivery time of goods abroad is long, and the wooden frame will be used to package to ensure the quality of the product is intact.
Q:What are the shipping methods supported by the goods?
A:We choose according to the needs of customers, FOB,CIF,CFR and so on.
){kind=link}
){kind=link}