| Production Scores: | Single Variety |
|---|---|
| Production Continuity: | Discontinuity |
| Condition: | New |
| Automation: | Automatic |
| After-sales Service: | Overseas Service Center Available |
| Duration of Use: | Six to Seven Years |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 1. The equipment is composed of a double-station grinding mechanism, a double-channel positive and negative conveying mechanism, and a turning mechanism. The import and export are at one end of the machine, and a person is used to load and receive materials. During operation, the workpiece is placed on the conveyor belt transported forward manually. After the front of the workpiece is polished through the grinding area, the magnetic side of the end of the product is turned over and imported into the reverse conveyor belt. After the reverse side of the product is polished through the grinding area, it is transported to the entrance and exit position, and the workpiece is collected manually.
2. The grinding system is composed of two sets of planetary brush disks. A single brush disk rotates at high speed and the whole combination rotates quickly to remove the residual burrs in the groove of the end edge of the workpiece in an all-round way or reverse the obtuse Angle; The front and back two groups of brush disk turn opposite to ensure that there is no dead corner of deburring, and the texture is uniform; The brush disk can be replaced with different materials and mesh numbers to obtain different surface roughness R Angle process requirements; Each group of grinding head is equipped with an independent electronic control system, which can run separately or in combination according to the demand; Servo motor control automatic lifting, precise positioning of workpiece thickness, automatic compensation of consumables loss.
3. Double channel belt conveyor, wear-resistant high temperature high strength polyurethane conveyor belt, transmission speed 0-5 meters per minute variable frequency adjustable; Two belts independent motor control, a conveyor belt forward conveyor, a conveyor belt backward conveyor; The conveying bed is installed with a permanent magnetic chuck, which can adsorb a minimum of 10cm² workpiece flat steel parts without any fixture (sample workpiece can be safely adsorbed); Conveyor bed support is unilateral open structure, door sealing plate, can be easily opened to replace the conveyor belt, maintenance and repair equipment, configuration of open door power off system, to ensure the safety of operators.
4. The turning mechanism is installed at the end of the conveyor bed, the magnetic turning, the forward conveyor product flows into the lower part of the turning magnetic roller, the magnetic roller adsorbs and turns the product over, and the conveyor is transferred to the reverse conveyor belt, to complete the uninterrupted and barrier-free turning over, and to achieve the uninterrupted polishing and deburring of the front and back of the product.
5. The polishing chamber is a closed structure, equipped with transparent acrylic observation window, and installed waterproof and explosion-proof lighting inside the chamber to visualize the processing process. The top of the box is installed with water mist purification system to discharge the box water mist to protect the motor safety; Door sealing plate, can be easily opened to replace consumables, maintenance and repair equipment. Configure the door opening and power off system to ensure the safety of operators.
| Disk rotation: 2400r | Planetary revolution: 120r | Transmission speed: 0-5/min (variable frequency) |
| Processing thickness: 0.5-60mm | Minimum processing: 10*20mm (sheet) | Maximum processing width: ≤80mm |
| Worktable height: 800mm±50mm | Control system: PLC programming, man-machine interface |
Q:How to remove product burrs?
A:The equipment consists of two groups of planetary brush disk combined structure; A single brush disc high-speed autobiography, the whole combination of rapid rotation, the front and back two groups of brush disc combination running in the opposite direction, through sweeping, grinding, filing and other actions, all-round no dead Angle to the workpiece edge, holes, grooves burrs
Q:What is the price of the equipment?
A:According to customer product process needs, machine configuration depends,High equipment configuration, preferential prices, much cheaper than Europe and the United States
Q:What are the features of the equipment?
A:The company independent research and development manufacturing, with complete independent intellectual property rights; The equipment is convenient to operate, simple to maintain, energy saving and environmental protection, stable and durable, and the processing product efficiency is high and the quality is good, and the equipment is upgraded for the metal parts polishing industry.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}